- Soundness of Cement & Hydrated Lime
- Lenght Change (Shrinkage and Expansion)
- Fineness (Specific Surface)
- Setting Time & Consistency
- Preparation of Mortar Prisms for Compression Tests
- Compression and Flexure Testing Frames
- Hydraulic Power Pack
- MANUEL Compression and Flexure Testing Machines
- SEMI-AUTOMATIC Compression and Flexure Testing Machines
- AUTOMATIC Compression and Flexure Testing Machines
- Building Lime, Grout and Mud Testing
- Autoclave
- Cement Samplers
- Le Chatelier Flask
- Home ›
- Products ›
- CEMENT ›
- Length Change (Shrinkage And Expansion)
Length Change (Shrinkage And Expansion)
Product Code
UTCM-0029E | Three Gang Shrinkage Mould 40.1x40x160 mm, EN, Minimum Hardness HV 400 |
UTCM-0030E | Spare Steel Insert, EN, for UTCM-0029E, 18 pieces/pack |
UTCM-0031E | Reference Rod, 160 mm Long with 6mm Tips |
UTCM-0031A | Reference Rod, 170 mm Long with 6mm Tips |
UTCM-0032E | Tamper, Hardwood, 38x15x200mm, 250 g, EN |
UTCM-0033A | Two Gang Shrinkage Mould, 25x25x285 mm, ASTM |
UTCM-0034 | Spare Steel Insert, ASTM C490, 12 pieces/pack |
UTCM-0035 | Reference Rod, 295 mm Long with 6mm Tips |
UTCM-0140A | Two Gang Expansion Mould, 50x50x285 mm |
UTCM-0154E | Insert Set for UTCM-0029, polyethylene (6 pcs.-15x40x160mm) |
UTCM-0662A | Tamper, Hardwood, 13x25x150mm |
UTC-0410 | Tamping Rod, Ø:10x300 mm |
Standards
ASTM C151, C452, C490, C596, C806, C1293; EN 12617-4, 12808-4The moulds are used for preparing the specimens for the purpose of determining the length changes (shrinkage/expansion) in hardened hydraulic cement mortar and concrete.
According to all standardized test methods for determining the length changes of hardened cement paste, mortar under different conditions, the Moulds are used together with the any UTEST Length Comparators (UTCM-0200 or UTCM-0210) fit the specimens sizes.
Minimum surface hardness of UTCM-0029E is HV400 which is recommended by the EN standard.
All metal moulds surfaces are protected with anti-corrosion oil and all parts of them are matchmarked.
The moulds are supplied complied with the steel inserts screwed on.
Reference rod and other equipment be should ordered separately.
For the purpose of determining the length changes (shrinkage/expansion) in hardened concrete including aggregate which has larger sized max, UTC-1153, UTC-1155 or UTC-1161 moulds are also used together with UTC-1170 Large type digital length comparator.
Product Code | UTCM-0029E | UTCM-0033A | UTCM-0140A |
---|---|---|---|
Dimensions | 300x190x70 mm | 390x100x45 mm | 390x160x70 |
Weight (approx.) | 12 kg | 7 kg | 18 kg |