Français
English
- Soundness of Cement & Hydrated Lime
- Lenght Change (Shrinkage and Expansion)
- Fineness (Specific Surface)
- Setting Time & Consistency
- Preparation of Mortar Prisms for Compression Tests
- Compression and Flexure Testing Frames
- Hydraulic Power Pack
- MANUEL Compression and Flexure Testing Machines
- SEMI-AUTOMATIC Compression and Flexure Testing Machines
- AUTOMATIC Compression and Flexure Testing Machines
- Building Lime, Grout and Mud Testing
- Autoclave
- Cement Samplers
- Le Chatelier Flask
- Home ›
- Products ›
- CEMENT ›
- Flow Table
Flow Table
Product Code
UTCM-0660A | Cement Flow Table ASTM, Metric |
UTCM-0661A | Cement Flow Mould ASTM, Metric |
UTCM-0662A | Tamper ASTM Hardwood 13x25x150 mm |
UTCM-0663A | Motorized Cement Flow Table ASTM |
UTCM-0660E | Cement Flow Table EN |
UTCM-0661E | Cement Flow Mould EN |
UTCM-0662E | Tamper EN Ø 40x200 mm 250 gr |
UTCM-0663E | Motorized Cement Flow Table EN |
Models for 220-240V 50-60 Hz, 1 ph. | UTC-0663A | UTC-0663E |
Models for 110-120V 60 Hz, 1 ph. | UTC-0663A-N |
Standards
ASTM C230; EN 459-2, 1015-3
There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available.
The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle.
EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical Mould is made of stainless steel and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height.
ASTM model; the table is manufactured from bronze and has 254 mm diameter. The conical Mould is made of brass has dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height.
Both models are supplied complete with stainless steel flow Mould and tamper. EN model also has a stainless steel hopper
UTCM-0660E UTCM-0660A UTCM-0662A - UTCM-0661A UTCM-0662E - UTCM-0661E
| UTCM-0660A UTCM-0663A ASTM | UTCM-0660E UTCM-0663E EN |
|---|---|---|
Table Diameter | 254 mm | 300 mm |
Cone Base/Top Diameter | 100.0 mm /70.0 mm | 100.0mm /70.0 mm |
Cone Height | 50.0 mm | 60.0 mm |
Drop Height | 12.7 mm | 10.0 mm |
Power | 180 W ( Motorized ) | |
Product Code | Dimensions | Weight (approx.) |
UTCM-0660A | 250x360x350 mm | 12,5 Kg |
UTCM-0660E | 300x400x350 mm | 20 |
UTCM-0663A | 400x450x400 mm | 35 |
UTCM-0663E | 450x560x300 mm | 34 |
