Français
English
- Soundness of Cement & Hydrated Lime
- Lenght Change (Shrinkage and Expansion)
- Fineness (Specific Surface)
- Setting Time & Consistency
- Preparation of Mortar Prisms for Compression Tests
- Compression and Flexure Testing Frames
- Hydraulic Power Pack
- MANUEL Compression and Flexure Testing Machines
- SEMI-AUTOMATIC Compression and Flexure Testing Machines
- AUTOMATIC Compression and Flexure Testing Machines
- Building Lime, Grout and Mud Testing
- Autoclave
- Cement Samplers
- Le Chatelier Flask
- Home ›
- Products ›
- CEMENT ›
- Three Gang Mould
Three Gang Mould
Product Code
UTCM-0892.2 | Three Gang Mould 40.1x40x160 mm, Steel, EN, Minimum Hardness HV200. |
UTCM-0892.4 | Three Gang Mould 40.1x40x160 mm, Steel, EN, Minimum Hardness HV400. |
UTCM-0893 | Feed Hopper for UTCM-0892 |
UTCM-0894 | Short and Long Spreaders and Straightedge for UTCM-0892 |
UTCM-0895 | Three Gang Cube Mould 50x50x50 mm, Steel, ASTM |
UTCM-0898 | Three Gang Cube Mould, 2” Plastic |
UTCM-0899A | Three Gang Mould 40x40x160 mm, Steel, ASTM |
UTCM-0926 | Cube Mould 70.7 mm, Steel, for UTCM-0930, BS |
Standards
EN 196-1, 413-2, 459-2, 1744-1, 1015-10, 1015-11, 13454-2; ASTM C109, C348; BS 4550
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined.
Minimum surface hardness of UTCM- 0892.4 is HV400 which is recommended by the EN standard. All moulds surfaces are protected with anti-corrosion oil. The webs of UTCM- 0892.4 and UTCM-0899A are matchmarked.
Minimum surface hardness of UTCM-0892.2 is HV200.
| Dimensions | Weight (approx.) |
|---|---|---|
UTCM-0892.4 | 300x190x70 mm | 10,5 kg _(Packed) |
UTCM-0893 | 210x200x40 mm | 1 kg |
UTCM-0895 | 110x230x60 mm | 3 kg |
UTCM-0898 | 110x250x70 mm | 1 kg |
UTCM-0899A | 300x190x70 mm | 12 kg _(Packed) |
UTCM-0926 | 100x125x90 mm | 3,5 kg_ |
