Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
- Home ›
- Products ›
- CONCRETE ›
- ASTM - Compression Testing Frames for Blocks
ASTM - Compression Testing Frames for Blocks
Product Code
UTC-4706 | 1100 kN (245000 lbf) Compression Testing Frame for Blocks, ASTM |
UTC-4716 | 1500 kN (335000 lbf) Compression Testing Frame for Blocks, ASTM |
UTC-4726 | 2000 kN (450000 lbf) Compression Testing Frame for Blocks, ASTM |
UTC-4736 | 3000 kN (670000 lbf) Compression Testing Frame for Blocks, ASTM |
UTC-4680A | Pedestal for ASTM 600 kN (135000 lbf), 1100 kN (245000 lbf) and 1500 kN (335000 lbf), Compression Testing Frames with Welded Walls |
UTC-4682A | Pedestal for ASTM 1550 kN (348000 lbf), 2000 kN (450000 lbf), 2200 kN (495000lbf) and 3000 kN (670000 lbf) Compression Testing Frames with Welded Walls |
Standards
ASTM C140, C1314
ASTM & AASHTO compression testing frames for blocks consist of a rigid welded steel walls, a loading cylinder assembly and lower and upper (spherically-seated) bearing platens.
The frames provide the stability needed for accurate and repeatable test results over the years of operation.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with the load capacity. The lower bearing platens are provided with centering line/s
UTC-4680A or UTC-4682A Pedestals that are made of steel to facilitate the user’s placement of specimens in the machines for compression test should be ordered separately.
See the below tables for supplied items with the frames.
ASTM COMPRESSION TESTING FRAMES FOR BLOCKS | ||||
|---|---|---|---|---|
Models Photo |
|
|
|
|
Models | UTC-4706 | UTC-4716 | UTC-4726 | UTC-4736 |
Capacity | 1100 kN (245000 lbf) | 1500 kN (335000 lbf) | 2000 kN (450000 lbf) | 3000 kN (670000 lbf) |
Frame Type | Welded Steel | Welded Steel | Welded Steel | Welded Steel |
Lower Bearing Block, Dimensions (D) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) |
Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) | 310x410x90mm (12.2”x16.1”x3.5”) |
Surface Hardness of Bearing Blocks | 60 HRC | 60 HRC | 60 HRC | 60 HRC |
Flatness Tolerance | 0,025 mm / 150 mm (0,001”/6”) | 0,025 mm / 150 mm (0,001”/6”) | 0,025 mm / 150 mm (0,001”/6”) | 0,025 mm / 150 mm (0,001”/6”) |
Piston Diameter | 230 mm (9,06”) | 230 mm (9,06”) | 250 mm (9,84”) | 300 mm (12,2”) |
Piston Stroke | 50 mm (1,97”) | 50 mm (1,97”) | 50 mm (1,97”) | 50 mm (1,97”) |
Maximum Vertical Clearance Between Bearing Blocks (E) | 250 mm (9,84”) | 250 mm (9,84”) | 250 mm (9,84”) | 250 mm (9,84”) |
Horizontal Clearance (B) | 320 mm (12,6”) | 320 mm (12,6”) | 360 mm (14,17”) | 415 mm (16,34”) |
Dimensions (wxlxh) (Axd*xF) (d*)Depth | 380x451x1104 mm (14,96”x17,76”x43,86”) | 380x451x1104 mm (14,96”x17,76”x43,86”) | 420x453x1144 mm (16,54”x17,83”x45,04”) | 475x497x1204 mm (18,7”x19,57”x47,4”) |
Weight | 723 kg (1595 lbs) | 723 kg (1595 lbs) | 810 kg (1785 lbs) | 1032 kg (2275 lbs) |
Pedestal (Optional) | UTC-4680 | UTC-4680 | UTC-4682 | UTC-4682 |
| The frames are supplied complete with ; • 50 mm (1,97”), 30 mm (1,2”), 15 mm (0,59”) height x Ø 205 mm (Ø8,07”) distance pieces • Scissor Jack for Loading Platens/Bearing Blocks, (UTC-4629) • Removable transparent front and rear safety doors • The front safety doors have an automatic safety device to stop the machine if the door is opened during a test. | |||
