Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
Product Code
UTC-6727 | 2000 kN EN 12390-4 Capacity Four Column Compression Testing Frame, for Cubes and Cylinders |
UTC-6737 | 3000 kN EN 12390-4 Capacity Four Column Compression Testing Frame, for Cubes and Cylinders |
UTC-6748 | 4000 kN EN 12390-4 Capacity Four Column Compression Testing Frame, for Cubes and Cylinders |
UTC-6758 | 5000 kN EN 12390-4 Capacity Four Column Compression Testing Frame, for Cubes and Cylinders |
UTC-4684 | Pedestal for 2000 kN and 3000 kN Four Column Compression Testing Frames |
UTC-4686 | Pedestal for 4000 kN and 5000 kN Four Column Compression Testing Frames |
Standards
EN 12390-4, EN 12390-3
UTC-6727, UTC-6737, UTC-6748 and UTC-6758 compression testing frames with four column for cubes and cylinders consist of a loading cylinder assembly, lower and upper (spherically-seated) loading platens. acc. to EN standards.
EN four column compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.
The frames are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit swich for piston stroke for safety. The diameter of the pistons are designed to work with their load capacities. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.
The lower loading platens are provided with centering lines and fixture for centering specimens.
UTC-4684 and UTC-4686 Pedestals that are made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
See the below table for supplied items with the frames.
EN 12390-4 FOUR COLUMN COMPRESSION TESTING FRAMES FOUR CUBES AND CYLINDERS | ||||
|---|---|---|---|---|
Models | UTC-6727 | UTC-6737 | UTC-6748 | UTC-6758 |
Product Photo |
|
|
|
|
Capacity | 2000 Kn | 3000 kN | 4000 kN | 5000 kN |
Frame Type | Four Column | Four Column | Four Column | Four Column |
Lower Platens Dimensions (D) | Ø 300 mm | Ø 300 mm | Ø 360 mm | Ø 360 mm |
Upper Platens With Ball Seating Assembly Dimensions (C) | Ø 300 mm | Ø 300 mm | Ø 360 mm | Ø 360 mm |
Surface Hardness of Loading Platens | ≥ 53 HRC | ≥ 53 HRC | ≥ 53 HRC | ≥ 53 HRC |
Flatness Tolerance | 0,03 mm | 0,03 mm | 0,03 mm | 0,03 mm |
Piston Diameter | 300 mm | 350 mm | 400 mm | 450 mm |
Piston Stroke | 50 mm | 50 mm | 100 mm | 100 mm |
Maximum Vertical Clearance Between Platens (E) | 350 mm | 350 mm | 520 mm | 520 mm |
Sizes of Specimens For Cubes | 200 mm (**) | 200 mm (**) | 200 mm (**) | 200 mm (**) |
Sizes of Specimens For Cylinders (up to) | Ø160x320 mm | Ø160x320 mm | Ø250x500 mm (**) | Ø250x500 mm (**) |
Dimensions (wxlxh) (Axd*xG) | 590x560x1100 mm | 680x690x1150 mm | 772x825x1540 mm | 772x825x1570 mm |
Weight | 935 kg | 1435 kg | 2485 kg | 2540 kg |
Pedestal (Optional) | UTC-4684 | UTC-4684 | UTC-4686 | UTC-4686 |
| (d*) depth (**) Limited by capacity of the frame The machines for cubes and cylinders are supplied complete with; • 100 mm, 50 mm, 30 mm height x Ø205 mm distance pieces (two pcs. each for UTC-6748 and UTC-6758) • UTC-4622E - Fixture for Centering Specimens, compatible with Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders(for UTC-6727 and UTC-6737) • UTC-4624E - Fixture for centering specimens, compatible with Ø360 mm lower loading platen for 150 mm and 250 mm cubes, Ø150 mm and 250 mm cylinders (for UTC-6748 and UTC-6758) • Removable transparent front and rear safety doors. • The front safety doors have an automatic safety device to stop the machine if the door is opened during a test. Appropriate distance piece/s for the cylinder and cube specimens with the height of lower than 150mm should be ordered separately. | |||
