Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
GENERAL Purpose Testing Frames for Cubes and Cylinders
Product Code
UTC-4713G | 1500 kN Capacity General Purpose Compression Testing Frame wıth ø216mm Loading Platens for Cubes and Cylinders |
UTC-4723G | 2000 kN Capacity General Purpose Compression Testing Frame with Ø216mm Loading Platens for Cubes and Cylinders |
UTC-4733G | 3000 kN Capacity General Purpose Compression Testing Frame with Ø216mm Loading Platens for Cubes and Cylinders |
UTC-4727G | 2000 kN Capacity General Purpose Compression Testing Frame with Ø 300 mm Loading Platens for Cubes and Cylinders |
UTC-4737G | 3000 kN Capacity General Purpose Compression Testing Frame with Ø 300 mm Loading Platens for Cubes and Cylinders |
UTC-4680A | Pedestal for ASTM 600 kN (135000 lbf), 1100 kN (245000 lbf) and 1500 kN (335000 lbf), Compression Testing Frames with Welded Walls |
UTC-4682A | Pedestal for ASTM 1550 kN (348000 lbf), 2000 kN (450000 lbf), 2200 kN (495000lbf) and 3000 kN (670000 lbf) Compression Testing Frames with Welded Walls |
General purpose testing frames for cubes and cylinders consist of a rigid welded steel walls, a loading cylinder assembly and Ø 216 mm or Ø 300 mm a lower and an upper (spherically-seated) loading platens by taking into account user requests for general purposes.
The frames have a 380 mm vertical clearance that make possible to perform compression test of cylinders with capping retainers and neopren pads.
The General Purpose compression testing frames provides the stability needed for accurate and repeatable test results over the years of operation.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right hand side of the load frames for easier accessibility, increased productivity and for safer operations.
All frames also have front and rear protective doors and limit swich for piston stroke for safety,
UTC-4680A and UTC-4682A Pedestals that are made of steel to facilitate the user’s placement of specimens in the frames for compression test should be ordered separately.
See the below tables for supplied items with the frames.
GENERAL PURPOSE COMPRESSION TESTING FRAMES WITH Ø216 mm LOADING PLATENS FOR CUBES AND CYLINDERS | |||
|---|---|---|---|
Models | UTC-4713G | UTC-4723G | UTC-4733G |
Product Photo |
|
|
|
Capacity | 1500 kN | 2000 kN | 3000 kN |
Frame Type | Welded Steel | Welded Steel | Welded Steel |
Lower Bearing Block, Dimensions (D) | Ø 216 mm (8,5”) | Ø 216 mm (8,5”) | Ø 216 mm (8,5”) |
Upper Bearing Block, (With Spherically Seating Assembly) Dimensions (C) | Ø 216 mm (8,5”) | Ø 216 mm (8,5”) | Ø 216 mm (8,5”) |
Surface Hardness of Bearing Blocks | 55 HRC | 55 HRC | 55 HRC |
Flatness Tolerance | 0,05 mm | 0,05 mm | 0,05 mm |
Piston Diameter | 230 mm | 250 mm | 300 mm |
Piston Stroke | 50 mm | 50 mm | 50 mm |
Maximum Vertical Clearance Between Bearing Blocks (E) | 340 mm (13,4") | 340 mm (13,4") | 340 mm (13,4") |
Horizontal Clearance (B) | 320 mm | 360 mm | 415 mm |
For Cylinder Specimens Sizes (up to) | Ø160x320 mm | Ø160x320 mm | Ø160x320 mm |
For Cubes Specimens Sizes (up to) | 150 mm (**) | 200 mm (**) | 200 mm (**) |
Dimensions (wxlxh) (Axd*xF) | 380x451x1104 mm | 420x453x1144 mm | 475x497x1204 mm |
Weight | 540 kg | 630 kg | 850 kg |
Pedestal (Optional) | UTC-4680 | UTC-4682 | UTC-4682 |
(d*) depth (**) Limited by capacity of the frame
The frames are supplied complete with; • 100 mm, 50 mm and 2 pcs. 30 mm x Ø165 mm distance pieces • Removable transparent front and rear safety doors | |||
GENERAL PURPOSE COMPRESSION TESTING FRAMES WITH Ø 300mm LOADİNG PLATENS FOR CUBES AND CYLİNDERS | ||
|---|---|---|
Models | UTC-4727G | UTC-4737G |
Product Photo |
|
|
Capacity | 2000 kN | 3000 kN |
Frame Type | Welded Steel | Welded Steel |
Lower Bearing Block, Dimensions (D) | Ø 300 mm | Ø 310 mm |
Upper Bearing Block, (With Spherically Seating Assembly) Dimensions (C) | Ø 300 mm | Ø 300 mm |
Surface Hardness of Bearing Blocks | 55 HRC | 55 HRC |
Flatness Tolerance | 0,05 mm | 0,05 mm |
Piston Diameter | 250 mm | 300 mm |
Piston Stroke | 50 mm | 50 mm |
Maximum Vertical Clearance Between Bearing Blocks (E) | 350 mm | 350 mm |
Horizontal Clearance (B) | 360 mm | 415 mm |
For Cylinder Specimens Sizes (up to) | Ø160x320 mm | Ø160x320 mm |
For Cubes Specimens Sizes (up to) | 200 mm (**) | 200 mm (**) |
Dimensions (wxlxh) (Axd*xF) | 420x453x1144 mm | 475x497x1204 mm |
Weight | 665 kg | 890 kg |
Pedestal (Optional) | UTC-4682 | UTC-4682 |
(d*) depth (**) Limited by capacity of the frame
The frames are supplied complete with; • 100 mm, 50 mm and 30 mm x Ø205 mm distance pieces • Removable transparent front and rear safety doors | ||
