Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
- Home ›
- Products ›
- CONCRETE ›
- Lower and Upper Platens
Lower and Upper Platens
Product Code
UTC-4511 | Lower and Upper (spherically seated) Bearing Blocks, Ø105 mm (6,5”), ASTM C39 |
UTC-4512 | Lower and Upper (spherically seated) Bearing Blocks, Ø165mm (6,5”), ASTM C39 |
UTC-4513 | Lower and Upper (spherically seated) Bearing Blocks, Ø216 mm (8,5”), ASTM C39 |
UTC-4514 | Lower and Upper (spherically seated) Loading Platens, (220x410x50) mm (8,66x16,1x1,97”) |
UTC-4516 | Lower and Upper (spherically seated) Bearing Blocks, (310x410x90) mm (8,66x16,1x1,97”), ASTM C140 |
UTC-4517 | Lower and Upper (spherically seated) Loading Platens, Ø 300 mm, EN 12390-4 |
UTC-4518 | Lower and Upper (spherically seated) Loading Platens, Ø360 mm, EN 12390-4 |
UTC-4519 | Lower and Upper (spherically-seated) Loading Platens, 310x510x50 mm EN 12390-4 and EN 772-1 |
UTC-4528 | Upper Bearing Platens Replacement Console, for UTC-4725 and UTC-4735 |
UTC-4622E | Fixture for Centering Specimens for Ø300mm Lower Loading Platen |
UTC-4624E | Fixture for Centering Specimens for Ø360mm Lower Loading Platen |
UTC-4626E | Fixture for Centering Specimens for 310x510x50mm Lower Loading Platen for UTC-5729, UTC-5739, UTC-6729, UTC-6739 UTC-6749 and UTC-6759 frames |
UTC-4629 | Scissor Jack for Loading Platens/Bearing Blocks for UTC-4514, UTC-4516 and UTC-4519 |
The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens.
- -Manufactured from high quality steel, which is then hardened, smoothed and finished
- -The roughness value for the surface texture of the platens are ≤ 3.2 µm
- -UTC-4512, UTC-4513, UTC-4517 and UTC- 4518 have centering rings on the lower platens for proper centering of 100 mm and 150 mm cube, 100 mm and 150 mm cylinder samples
- -Ø 300 mm UTC-4517 has an specimen centering apparatus on lower platen as standard for 150 mm cube
Lifting Device for Lower Loading Platen (UTC-4629) which can be used easy replacement of the distance pieces between the piston and the lower platen for setting the vertical clearence of the frames. The device should be ordered separately for UTC-4514, UTC-4516 and UTC-4519.
| UTC-4511 | UTC-4512 | UTC-4513 | UTC-4514 | UTC-4516 | UTC-4517 | UTC-4518 | UTC-4519 |
|---|---|---|---|---|---|---|---|---|
Sizes of Platens (mm) | Ø105mm (4,13”)Upper Ø165mm (6,5”) Lower | Ø165 mm (6,5”) | Ø216 mm (8,5”) | 220x410x50 mm | 310x410x90 mm (12,2”x16,1” x3,54”) | Ø300 mm | Ø360 mm | 310x510x50 mm |
Sizes of Specimens (Can be tested) | 2", 3", 4" dia. cylinders | 4", 6" dia. cylinders | 6" dia. cylinders | Blocks up to 220x410mm | Blocks up to 310x390mm (8,7”x15”,3”) | 100, 150, 160, 250 mm dia. cylinders 100, 150, 200 mm cubes | 100, 150, 160, 250 mm dia. cylinders 100, 150, 200 mm cubes | Masonary Units up to 310x510 mm |
Standards | ASTM C39 | ASTM C39 | ASTM C39 | EN 772-1 | ASTM C140 C1314 | EN 12390-4 | EN 12390-4 For ≥ 4000 kN compression frames. | EN 12390-4 EN 772-1 |
Hardness | ≥ 55 HRC | ≥ 55 HRC | ≥ 55 HRC | ≥ 600 HV | ≥ 60 HRC | ≥ 53 HRC | ≥ 53 HRC | ≥ 600 HV |
Dimensions (cm) | 11x11x13 (4,3”x4,3”x5”) | 17x17x13 (6,7”x6,7”x5”) | 22x22x13 (8,7”x8,7”x5”) | 23x43x15 | 33x43x15 (13”x17”x6”) | 32x32x20 mm | 43x43x30 mm | 33x50x14 mm |
Weight | 7 kg (15,4 lbs) | 20 kg (44 lbs) | 37 kg (82 lbs) | 170 kg | 200 kg (241 lbs) | 75 kg | 110 kg | 180 kg |
