CONCRETE
OUR PRODUCTS
Compresion Testing Frames

Distance Pieces and Pedestal

Product Code

UTC-4630

Distance Pieces, Ø 165x15 mm (Ø6,5”x0,59”)

UTC-4631

Distance Pieces, Ø 165x30 mm (Ø6,5”x1,18”)

UTC-4633

Distance Pieces, Ø 165x50 mm (Ø6,5”x1,97”)

UTC-4634

Distance Pieces, Ø 165x100 mm (Ø6,5”x3,93”)

UTC-4635

Distance Pieces, Ø 205x15 mm (Ø8,07”x0,59”)

UTC-4636

Distance Pieces, Ø 205x30 mm (Ø8,07”x1,18”)

UTC-4638

Distance Pieces, Ø 205x50 mm (Ø8,07”x1,97”)

UTC-4639

Distance Pieces, Ø 205x100 mm (Ø8,07”x3,93”)

UTC-4680

Pedestal for 600kN (135000 lbf), 1100 kN (245000 lbf) and 1500 kN (335000 lbf) Compression Testing Frames

UTC-4682

Pedestal for 2000 kN (450000 lbf) and 3000 kN (670000 lbf) Compression Testing Frames

UTC-4684

Pedestal for Four Column 2000 kN (45000 lbf) and 3000 kN (670000 lbf) Compression Testing Frames

UTC-4686

Pedestal for Four Column 4000 kN (900000 lbf) and 5000 kN (1250000 lbf) Compression Testing Frames

Standards
EN 12390-3, 12390-4; BS 1881; ASTM C39
Technical sheet Ask for Quote

Distance pieces are used to reduce the amount of vertical clearance between the upper platen and the lower platen. For lowering  the minimum distance between upper and lower platens down to required height.

Distance pieces are equipped with handles.


Product Code

Dimensions

Weight (approx.)

UTC-4630

165x165x15 mm

(6,5”x6,5”x0,59”)

2,5 kg (5,5 lbs)

UTC-4631

165x165x30 mm

(6,5”x6,5”x1,18”)

5 kg  (11 lbs)

UTC-4633

165x165x50 mm

(6,5”x6,5”x1,97”)

8 kg (17,6 lbs)

UTC-4634

165x165x100 mm

(6,5”x6,5”x3,93”)

15,5 kg (34,2 lbs)

UTC-4635

205x205x30 mm

(8,07”x8,07”x0,59”)

4 kg (8,8 lbs)

UTC-4636

205x205x30 mm

(8,07”x8,07”x1,18”)

8 kg (17,6 lbs)

UTC-4638

205x205x50 mm

(8,07”x8,07”x1,97”)

13 kg (28,7 lbs)

UTC-4639

205x205x100 mm

(8,07”x8,07”x3,93”)

24,5 kg (54,0 lbs)

UTC-4680

545x540x545  mm

50 kg 

UTC-4682

725x540x445 mm

55 kg 

UTC-4684

775x580x445 mm

84 kg 

UTC-4686

785x580x445 mm

90 kg 

LOADING CYLINDER ASSEMBLY

All frames have a single acting up stroking ram. The diameter of the piston is designed to work with the load capacity.

The maximum ram movement is 50 mm. The pressure transducer is used for load measurements.  There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.


                    Loading Cylinder Assembly and Limit Switch

PEDESTAL FOR FRAMES

The pedestals make it easier for the user to placement of specimens in the frames for compression test.


        UTC-4680 or UTC-4682 Pedestal