UTC-5663.FPR and UTC-5666.FPR Flexural testing machines allow inexperienced to perform the test. Once the machine is switched on and specimen is placed, then the only required operations are;

• -Setting test parameters, including pace rate only required when the specimen type is changed.
• -Pressing the START button on the control unit.
• -The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
• -Automatically saves the test parameters and test results.

The Machines consist of a rigid steel frame and hydraulic power pack with U-Touch PRO Control Unit and provide the stability needed for accurate and repeatable test results over the years of operation.

UTC-5663.FPR is supplied complete with Flexural testing assembly with 2 upper and 2 lower rollers (Ø40x520 mm)

UTC-5666.FPR is supplied complete with Flexural testing assembly with 2 upper and 2 lower rollers (Ø68x630 mm)

 The main characteristics are:

• -Closed loop control with automatic test procedure
• -Has the accuracy of Class 1 starting from 2% of the full capacity.
• -Supplied with factory calibration certificate for load measurement
• -Can perform the test with load control  
• -The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines.

• -Load measurment with a loadcell
• -High stability welded steel frame

• -Easy loading and unloading specimens

U-Touch PRO Control Unit for Automatic Compression / Flexure Testing Machines

U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines.

All the operations of U-Touch PRO are controlled from the front panel touch screen display.

U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics

PLEASE see the pages of “U-Touch PRO Control Unit for Automatic Compression/Flexure Testing Machines “ for details of the properties

UTEST Software for Automatic Compression / Flexure Testing Machines

UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines

The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines

Safety Features 

• -Maximum pressure valves to avoid machine overloading
• -Piston travel limit switch
• -Emergency stop button
• -Software controlled maximum load value