UTC-5501 Flexural Testing Assembly for Concrete Beams

The test assembly, conforming with EN 12390-5, ASTM C78, ASTM C293, BS 1881:118, is used for center or two-point (third-point loading-ASTM) loading flexural tests on 100 mm or 150 mm concrete beams.

Can be used with all UTEST flexural testing frames. The distance of lower rollers can be adjusted between 100 mm to 800 mm. The distance between upper rollers can be set to 100 mm or 150 mm. For  center-point loading flextural test one of the rollers can be removed and the other placed in the center. The rollers dimensions are 38 mm dia.x 160 mm length.

UTC-5502 Flexural Testing Assembly for Concrete Kerbs

The testing assembly, conforming with EN 1340, is used for flexural tests on concrete kerbs. The set consists of two lower rollers 38 mm dia. x 620 mm long and 40 mm dia. upper loading piston with ball seating assembly.

Can be used with all UTEST flexural testing frames. The distance of lower rollers can be adjusted between 100 mm to 800 mm. 

UTC-5504 Flexural Test Assembly

UTC-5504 Flexural Testing Assembly consist of two lower rollers and one upper  roller of 38 mm dia. and 620 mm length is used for flexural tests on concrete paving flags and concrete terrazo tiles, natural stone kerbs and slabs. The distance of lower rollers can be adjusted between 100 mm to 800 mm. Conform with EN 1339, EN 1343, EN 12372.

A user with the UTC-5004 Flexure Test Assembly for flexural strenght tests of concrete paving slabs and concrete terrazo tiles, natural stone curbs and slabs, additionally it is possible to carry out flexural strenght test of concrete curb according to EN 1340 by supplying only UTC-5003.

UTC-5507 Auxiliary Testing Frame for The Measurement of Deflection on Concrete Beams

The Auxiliary testing frame UTC-5507 is used for the measurement of flexural performance of fiber-reinforced concrete (FRC) acc. to ASTM C1609 especially 100x100x400/500 mm and 150x150x500/600 mm beams.

For testing in accordance with ASTM C1609, in addition to UTC-5507, the following equipment should be supplied.

Spilitting Tensile Test for Concrete Paving Blocks and Compressive Strength Test with Flexural Testing Frames

For splitting tensile test on concrete paving blocks (EN 1338) in addition to any Utest Flexural frame the following accesories should be ordered.

• -Splitting tensile test device (UTC-0355 or UTC-0356)
• -Lower and upper (spherical seating) Loading Platens (UTM-8516 / Ø165 mm)

For the compressive strength test in addition to any Utest flexural testing frame the following accesories should be ordered

• -Depending on the height of the specimens to be tested, distance pieces (15 mm: UTC-4630, 30 mm:UTC-4631, 50 mm: UTC-4633, 100 mm: UTC-4634),
• -Lower and Upper (spherical seating) Loading Platens (UTM-8516 / Ø165 mm)