Français
English
- AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 Automatic Compression Testing Machines with Welded Walls for Cubes and Cylinders
- EN 12390-4 Automatic Four Column Compression Testing Machines for Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonary Units, Cubes and Cylinders
- EN 12390-4 - EN 772-1 Automatic Four Columns Compression Testing Machines for Masonary Units, Cubes and Cylinders
- EN 772-1 and General Purpose Automatic Compression Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
-
AUTOMATIC - GENERAL Compression Testing Machines
- U-Touch PRO Control Unit for Automatic Concrete&Cement Compression/Flexure Testing Machines
- UTEST SOFTWARE for Automatic Concrete&Cement Compression/Flexure Testing Machines
- GENERAL Purpose Automatic Compression Testing Machines for Cubes and Cylinders
- GENERAL Purpose and EN 772-1 Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cubes and Cylinders
- ACCESSORIES for Compression Testing Machines
- SEMI-AUTOMATIC - ASTM & AASTHO Compression Testing Machines
-
SEMI-AUTOMATIC - EN Compression Testing Machines
- EN 12390-4 EN SEMI-AUTOMATIC Compression Testing Machines for Cubes and Cylinders
- EN 772-1 and General Purpose Semi-Automatic Compressıon Testing Machines for Masonary Units/Blocks, Cylinders And Cubes
- EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
- SEMI-AUTOMATIC - GENERAL PURPOSE Compression Testing Machines
- MANUAL Compression Testing Machines
- ASTM & AASHTO - Compression Testing Frames
-
EN - Compression Testing Frames
- EN 12390-4 Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 Four Column Compression Testing Frames for Cubes and Cylinders
- EN 12390-4 and EN 772-1 Compression Testing Frames with Welded Walls for Cubes, Cylinders and Masonary Units
- EN 12390-4 and EN 772-1 Compression Testing Frames with Four Column for Cubes, Cylinders and Masonary Units
- EN 772-1 and General Purpose Compression Testing Frame for Masonary Units/ Blocks, Cylinders and Cubes
-
SEMI-AUTOMATIC Compression and Flexure Testing Machines
- GENERAL - Compression Testing Frames
- ACCESSORIES for Compression Frames
- Hydraulic Power Packs
- FLEXURAL Testing Frames
-
AUTOMATIC & SEMI AUTOMATIC FLEXURAL Testing Machines
- Manual Flexural Testing Machine
- Semi-Automatic Flexural Testing Machine
- Automatic Flexural Testing Machines Rectangle Type
- Automatic Flexural Testing Machine C Type
- Automatic Flexural Testing Machine Four Column Type
- Special C Type Flexural Testing Machines
- Servo Controlled Universal Automatic Bending Test Machine
- Advanced Testing Systems
- ACCESSORIES for Flexural Testing Frames
- Workability & Consistency
-
SCC - Workability & Consistency
- SCC - Sieve Segregation Test Set
- SCC - Slump - Flow Test
- SCC - J-Ring, Narrow Gap, EN
- SCC - J-Ring, ASTM
- SCC - V Funnel
- SCC - L Shape Box Apparatus
- SCC - U Shape Box Apparatus
- SCC - Fill Box Apparatus (Kajima Test)
- Density (Unit Weight) Measure
- Air Contents
- Mass Concrete Temparature Measurement
- Bleeding of Freshly Mixed Concrete
- Setting Time & Consistency Time
- Mixing Concrete in The Laboratory
- Concrete Moulds
- Concrete Compaction
- Concrete Curing
- Grinding
- Capping
- Metal Location in Concrete
-
Non-Destructive Concrete Testing in Structures
- Concrete Test Hammer (Schmidt Hammer) N Type (UTEST)
- Concrete Test Hammer (Schmidt Hammer) N Type
- Ultrasonic Pulse Velocity Tester
- Pundit Lab. Ultrasonic Pulse Velocity Tester
- Complete Set of Crack Width Gauges
- Mechanical Strain Gauge
- Crack Microscope
- Carbonation Test Set
- Measurement of Reinforcement Corrosion Rate
- Digital Bond Strenght /Pull-off Tester
- Digital Rebar Pull-Out Force Tester
- General Properties of U-Touch PRO Control Units
- General Properties of Utest USOFT Softwares
EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC Compression Testing Frame for Masonary Units, Cubes and Cylinders
Product Code
UTS-5729.SLP | 2000 kN EN 12390-4 and EN 772-1 Semi-Automatic Compressıon Testıng Machines for Masonary Units, Cubes and Cylinders |
UTC-5739.SLP | 3000 kN EN 12390-4 and EN 772-1 Semi-Automatic Compressıon Testıng Machines for Masonary Units, Cubes and Cylinders |
UTC-0210 | High Precision Pressure Transducer and Electronic |
UTC-4682E | Pedestal for EN 1550 kN, 2000 kN, 2200 kN and 3000 kN Compression Testing Frames with Welded Walls |
Models for 220-240V 50-60 Hz, 1ph | UTC-5729.SLP | UTC-5739.SLP |
Models for 110-120V 60 Hz, 1ph | UTC-5729.SLP-N | UTC-5739.SLP-N |
Standards
EN 12390-4, EN 12390-3, EN 772-1
UTC-5729.SLP and UTC-5739.SLP models Semi-Automatic Compressıon Testıng Machines are manufactured for compression testing of masonary units, cubes and cylinders acc. to EN standards. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the test.
The machines are supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4.
The Semi-Automatıc Compression Machines consist of a welded frame ( see table), hydraulic power pack (UTC-4820) with LPI battery operated digital readout unit (UTC-UTC-4920LP).
UTC-4682E Pedestal that is made of steel to facilitate the user’s placement of specimens in the frame for compression test should be ordered separately.
Main Features
- -Class A starting from with the 5% of the machine capacity, (Special calibration option starting from 1% of the full range with UTC-0210)
- -1 channel with two different calibration table, test parameters and specimen information (by changing the sensor belong to other frame, the unit can be control for second test frame)
- -Multi-point calibration
- -Real time numeric display of load and load pressure
- -Peak hold property
- -Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4
- -Welded steel walled frame with lower and upper (shperically-seated) loading platens
- -Load measurment with a pressure transducer
- -Hydrolic pump with dual stage for rapid approach
- -RS232 Serial port for PC or thermal or dot matrix printer
- -Free of charge Utest software for compression/flexture testing machines(USOFT-4820.SLP) for compression, flexture, splitting tensile strength tests of construction materials such as concrete, cement, brick/masonary units
Safety Features
- -Maximum pressure valves to avoid machine overloading
- -Limit switch for piston stroke
- -Removable transparent front and rear safety doors
- -The front safety doors have an automatic safety device to stop the machine if the door is opened during a test.
EN 12390-4 and EN 772-1 EN SEMI-AUTOMATIC COMPRESSION TESTING MACHINES FOR MASONARY UNITS, CUBES AND CYLINDERS | ||
|---|---|---|
Models | UTC-5729.SLP | UTC-5739.SLP |
Product Photo |
|
|
Capacity | 2000 kN | 3000 kN |
Frame Type | Welded Steel | Welded Steel |
Lower Bearing Block, Dimensions (D) | 310x510x50 mm | 310x510x50 mm |
Upper Bearing Block, (With Spherically Seating Assembly ) Dimensions (C) | 310x510x50 mm | 310x510x50 mm |
Surface Hardness of Bearing Blocks | 55 HRC | 55 HRC |
Flatness Tolerance | 0,03 mm | 0,03 mm |
Piston Diameter | 250 mm | 300 mm |
Piston Stroke | 50 mm | 50 mm |
Maximum Vertical Clearance Between Bearing Blocks (E) | 330 mm | 330 mm |
Horizontal Clearance (B) | 360 mm | 415 mm |
Sizes of Specimens For Cylinders (up to) | Ø160x320 mm | Ø160x320 mm |
Sizes of Specimens For Cubes (up to) | 300 mm (**) | 300 mm (**) |
Sizes of Specimens For Masonary Units (up to) | 300x500 mm (**) | 300x500 mm (**) |
Power | 550 W | 550 W |
Oil Capacity | 20 L | 20 L |
Maximum Working Pressure | 410 Bar | 410 Bar |
Dimensions (wxlxh) (Axd*xF) | 740x550x1040 mm | 805x550x1145 mm |
Weight | 885 kg | 1185 kg |
Pedestal (Optional ) | UTC-4682 | UTC-4682 |
| (d*) depth (**) Limited by capacity of the frame
The machines for masonary units, cubes and cylindrs are supplied complete with; • 100 mm, 50 mm, 2x30 mm height x Ø205 mm distance pieces • Fixture for Centering Specimens, compatible with 310x510x50 mm lower loading platen for 100mm and 150mm cubes, Ø100mm and Ø150mm cylinders(UTC-4626E) • Scissor Jack for Loading Platens/Bearing Blocks, (UTC-4629 • Removable transparent front and rear safety doors. Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150mm should be ordered separately. | |
